Dear readers and followers, 

it is with a great pleasure that I introduce you to a new Topic: 
How to Hard Reset the Samsung Ace (sph-i325) or any other windows mobile phones.


First method:

1. Remove the storage card from the device, if one is present.
2. With phone powered off:

• Press and hold both the left and right softkeys.
• While both softkeys are held down, press and hold until the unit powers on.

3. As the device begins to power on, release both softkeys.
Note Once the phone powers on, you should see an onscreen alert message (a white screen with blue text). If you do not see this screen, let the device power up normally, turn it off again, and then repeat steps 2 and
4. Immediately after the alert screen appears, press the left softkey.
5. If the reset was successful, the device displays a pop-up message stating the device is currently reformatting. This process can take several minutes. Allow the process to finish without interruption.
6. When the device has finished resetting, follow the Windows Mobile setup instructions displayed on the screen.

Second Method::
Samsung i325 :: How To Do Hard Reset for it or any other WinMobile Phones
Hard Reset the Samsung Ace SPH-i325
1. Remove the memory card
2. Power off Samsung ACE, then press and hold the left and right softkeys + press ace i325 hard reset to power on device.
3. Release both keys and wait till you see an alert messsage
4. After the alert screen, press the left softkey
5. Reset begings, device will then be formetted by itself.
6. Then after that, just follow the instruction in setting up your newly reset phone.
Thanks and enjoy!

Reset a Windows Mobile HP iPAQ 

A soft reset stops all running applications, but does not erase any

programs or saved data. Be sure to save any unsaved data within a
running application before performing a soft reset.
To perform a soft reset:
1. Locate the recessed Reset button on the bottom of your HP iPAQ.
2. Use the stylus to lightly press the Reset button.
The HP iPAQ restarts and displays the Today screen.
A hard reset stops all running applications, but does not erase any
programs or saved data. A hard reset also resets all hardware registers.
Be sure to save any unsaved data within a running application before
performing a hard reset.
To perform a hard reset:
1. Press and hold the Calendar and iTask buttons.
2. While holding down these buttons, use the stylus to lightly press the
Reset button on the bottom of the HP iPAQ for about two seconds.
3. When the HP iPAQ screen begins to fade, release the Calendar
and iTask buttons first, and then remove the stylus from the Reset
button.
4. Plug the device into the AC Adapter or press the Reset button
again.
The HP iPAQ resets and powers on.
A clean reset clears all user-installed settings, programs, and data, and it
restores your HP iPAQ to factory settings. If you perform a clean reset, your HP
iPAQ loses all data, including data in Persistent Store.
To perform a clean reset and return your HP iPAQ to factory settings:
1*. Press and hold the Calendar, Power, and Messaging buttons.
2**. While holding down these buttons, use the stylus to lightly press the
Reset button on the bottom of the HP iPAQ until the device
restarts.
3. When the HP iPAQ restarts, release all of the buttons, and then
remove the stylus from the Reset button.
The HP iPAQ restarts and powers on.
* for the HX4700/4705 series, hold down the [Contacts] + [Inbox] buttons instead.
** for the HX4700/4705 series, there will be a clean reset confirmation. To cancel, press iTask and to confirm, press Calendar.

Enjoy!

Richguy - Miami FL, USA.

Read More »